{"title":"Tapcooler","description":"\u003cp\u003eTapcooler is a Norwegian producer of high-quality equipment for counter-pressure filling of beer into bottles and cans, and has achieved great international success with its products. Brewshop is proud to offer the Tapcooler range, including counter-pressure fillers, can filling stations, and the newly launched Tapcooler Double Can Filling Station for two counter-pressure fillers.\u003c\/p\u003e","products":[{"product_id":"tapcooler-mottrykksfyller-for-intertap-vent-matic-perlick-ultratap-nukatap","title":"Tapcooler Counter Pressure Bottle Filler for Intertap \/ Vent-Matic \/ Perlick \/ Ultratap \/ Nukatap","description":"\u003ch2\u003eTapcooler Counter Pressure Bottle Filler\u003c\/h2\u003e\n\u003cp\u003eSee also recommended accessories below.\u003c\/p\u003e\n\u003cp\u003eCompatible with Intertap, Ultratap, Vent-Matic, Nukatap and Perlick 600 series. Cannot be used on ventilated taps, i.e. taps that are not forward sealing.\u003c\/p\u003e\n\u003cp\u003eCan also be used to fill \u003ca href=\"\/en\/butikk\/fat-co2\/growlerwerks\"\u003euKeg\u003c\/a\u003e. You will then need a \u003ca href=\"\/en\/products\/silikonpropp-d50-5-59\"\u003erubber stopper\u003c\/a\u003e with a 9mm hole, which fits the 53mm inner diameter of the uKeg opening.\u003c\/p\u003e\n\u003cp\u003eCO\u003csub\u003e2\u003c\/sub\u003e connection with push-fit (John Guest) for hose\/tube with an outer diameter of \u003csup\u003e3\u003c\/sup\u003e\/\u003csub\u003e16\u003c\/sub\u003e inch. An adapter with a hose barb for use with soft hoses with 4-5 mm inner diameter is included. CO\u003csub\u003e2\u003c\/sub\u003e flow is controlled by a push-button valve. \u003c\/p\u003e\n\u003cp\u003eThe tube in the bottle connector is used to fill CO\u003csub\u003e2\u003c\/sub\u003e and beer from the bottom of the bottle. The tube is telescopic, allowing the counter pressure filler to be used with bottle heights of 10.5 - 31.5 cm. For taller bottles, the tube will not reach the bottom of the bottle. The seal to the bottle is molded from food-grade silicone. It has a flange that directs any spills, when the pressurized bottle is removed from the counter pressure filler, down along the bottle instead of splashing upwards. When filling containers with a larger opening, a suitable rubber stopper with a 9 mm hole can be used. \u003c\/p\u003e\n\u003cp\u003eThe counter pressure filler has an adjustable pressure relief valve that controls the pressure in the bottle and thus the filling speed. The speed at which beer can be filled without too much foam depends on the carbonation level, beer temperature, and bottle temperature. \u003c\/p\u003e\n\u003cp\u003eAll metal parts in the counter pressure filler are made of stainless steel (SS304). The CO\u003csub\u003e2\u003c\/sub\u003e adapter is made of aluminum. \u003c\/p\u003e\n\u003cp\u003eThe counter pressure filler comes with a storage box.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/cy5UA5oxKp8\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eTapcooler Counter Pressure Bottle Filler\u003c\/h2\u003e\n\u003cp\u003eCompact Counter Pressure Bottle Filler that plugs into beer taps with 10.0 mm inner diameter. Fits Intertap, Vent-Matic, Perlick 600 series, Ultratap and Nukatap. Fits Perlick 500 series with optional tap connector. Cannot be used with ventilated beer taps, i.e.  they can only be used with forward sealing beer taps. Optional extension tube, Intertap connection tube and beer valve with keg connector available. \u003c\/p\u003e\n\u003cp\u003ePush-fit (John Guest) CO\u003csub\u003e2\u003c\/sub\u003e connector for \u003csup\u003e3\u003c\/sup\u003e\/\u003csub\u003e16\u003c\/sub\u003e inch outer diameter tubes. Included barb adaptor for 6-8 mm inner diameter tubes. Optional ball lock adaptor available. CO\u003csub\u003e2\u003c\/sub\u003e flow is controlled by a push button valve. \u003c\/p\u003e\n\u003cp\u003eCO\u003csub\u003e2\u003c\/sub\u003e and beer is filled from the bottom of the bottle through the bottle connector tube. The tube is telescopic, enabling filling of bottles with  10,5 - 31,5 cm heigth. When filling taller bottles, the tube will not reach the bottom of the bottle. The bottle mouth seal is made from food grade silicon. It has a flange that directs eventual spills along the sides of the bottle. When filling large mouth containers, a bottle stopper of suitable size and with a 9 mm hole may be used. \u003c\/p\u003e\n\u003cp\u003eThe Counter Pressure Bottle Filler has an adjustable pressure relief valve controlling the pressure inside the bottle and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO\u003csub\u003e2 \u003c\/sub\u003elevel, beer temperature and bottle temperature. \u003c\/p\u003e\n\u003cp\u003eAll metal parts are made of stainless steel (SS304). The CO\u003csub\u003e2\u003c\/sub\u003e adaptor is made of aluminium.\u003c\/p\u003e\n\u003cp\u003eThe Counter Pressure Bottle Filler comes with a storage box.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41901945716834,"sku":"TCCPBF","price":899.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/2d1eae403e8b895fbb504ba852d44f1a-image.jpg?v=1746177015"},{"product_id":"skjoteslange-for-tapcooler-mottrykksfyller","title":"Extension Hose for Tapcooler Counter Pressure Filler","description":"\u003ch2\u003eSkjøteslange for Tapcooler Mottrykksfyller\u003c\/h2\u003e\n\u003cp\u003eSkjøteslangen festes mellom krantilkoblingen og mottrykksfylleren. Skru krankoblingen ut av mottryksfylleren med en mynt. Skru krankoblingen inn i hun-enden av skjøteslangen, med den medfølgende pakningen mellom. Skru han-enden av skjøteslangen inn i mottrykksfylleren. La den originale pakningen være i mottrykksfylleren. Reservepakning medfølger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Extension Tube\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe extension tube is installed between the tap connector and the counter pressure filler. Unscrew the tap connector from the counter pressure filler with a coin. Screw the tap connector into the female end of the extension tube, with the included seal in between. Screw the male end of the extension tube into the counter pressure filler. Leave the original seal in the counter pressure filler. A spare seal is included.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41901954138210,"sku":"TCCP-ET1","price":159.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/a2860833f37244e7ea17e70194103dd9-image.jpg?v=1746177340"},{"product_id":"ball-lock-adapter-for-tapcooler-mottrykksfyller","title":"Ball Lock Adapter for Tapcooler Counter Pressure Filler","description":"\u003cp\u003eConnecting the Tapcooler counter pressure bottle filler should be easy, and with this adapter, it becomes super easy to borrow a CO\u003csub\u003e2\u003c\/sub\u003e connection from a Cornelius keg. If many bottles are to be filled, it is best to take the CO\u003csub\u003e2\u003c\/sub\u003e connection from a different keg than the one being filled from. \u003c\/p\u003e\n\u003cp\u003eInsert the adapter into the counter pressure filler first, and connect the ball lock coupling afterward. When bottle filling is complete, the ball lock coupling must be removed before the adapter is taken out of the counter pressure filler. Press the collar on the push-fit coupling and pull the adapter straight out of the counter pressure filler. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Ball Lock Adapter with Release Tool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBall lock adaptor that inserts into the push fit CO\u003csub\u003e2 \u003c\/sub\u003econnecor. Fits grey ball lock disconnects. \u003c\/p\u003e\n\u003cp\u003eConnecting the Tapcooler Counter Pressure Bottle Filler is supposed to be easy, and with this adaptor it's super easy to borrow the CO\u003csub\u003e2 \u003c\/sub\u003econnection from a Cornelius keg. When filling multiple bottles, it's advicable to use the CO\u003csub\u003e2\u003c\/sub\u003e connection from a different keg than the one the bottles are filled from. \u003c\/p\u003e\n\u003cp\u003eInsert the adaptor into the Counter Pressure Bottle Filler first, then connect the ball lock disconnect. When bottle filling is finished, remove the ball lock disconnect from the adaptor before the adaptor is removed from the Counter Pressure Bottle Filler. Press the collet of the push fit connector and pull the adaptor out of the connector.  \u003c\/p\u003e\n\u003cp\u003eRelease tool to ease removal of the ball lock adaptor from the push-fit fitting is included.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41901954170978,"sku":"TCCP-BLA","price":125.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/1202796d8a271c939a6199b96d532f19-image.jpg?v=1746177341"},{"product_id":"tilkoblingsslange-til-intertap-og-nukatap-for-tapcooler-mottrykksfyller","title":"Connection Hose for Intertap and Nukatap for Tapcooler Counter Pressure Filler","description":"\u003cp\u003eThe connection hose screws directly into the tap spout fitting on Intertap or Nukatap faucets and into the tap connector at the top of the counter pressure filler. \u003c\/p\u003e\n\u003cdiv\u003eUnscrew the tap spout from the faucet and screw in the connection hose. Leave the original gasket in the faucet.  \u003c\/div\u003e\n\u003cdiv\u003eUnscrew the tap connector from the counter pressure filler with a coin, and screw in the connection hose. Leave the original gasket in the counter pressure filler. A spare gasket is included with the connection hose.\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003ePS! Not compatible with Ultratap. Instead, use the Extension Hose for Tapcooler Counter Pressure Filler.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eIntertap Connection Tube\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eWith this connection tube, it's even easier to connect the Counter Pressure Bottle filler to an Intertap, and it gives more flexibility if the space under the tap is limited, i.e. if the tap is installed in a beer tower.\u003c\/p\u003e\n\u003cp\u003eThe connection tube threads into the spout connection of the Intertap and into the tap connector on the top of the Counter Pressure Bottle Filler. \u003c\/p\u003e\n\u003cp\u003eRemove the spout from the Intertap, leaving the spout seal inside the tap. Unscrew the tap connector from the Counter Pressure Bottle Filler using a coin, leaving the seal inside the tap connector. Connect the connection tube. \u003c\/p\u003e\n\u003cp\u003eThis tube is too short to be used with the canning station.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41901954236514,"sku":"TCCPBF-IC","price":169.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/bbecdd199ffc809e5badb8b4e84a147d-image.jpg?v=1746177341"},{"product_id":"tapcooler-olventil-med-fatkobling-og-slange","title":"Tapcooler Beer Tap with Keg Coupler and Hose","description":"\u003cp\u003eUse this for efficient filling of beer bottles or cans from kegs. The FFL connection connects directly to a threaded ball lock disconnect. The swivel connection to the \u003ca href=\"\/en\/produkt\/fat-co2\/fat-og-co2\/tapcooler-mottrykksfyller-for-intertap-vent-matic-perlick\" target=\"_blank\"\u003ecounter-pressure filler\u003c\/a\u003e makes it easy to position the lever on the desired side.\u003c\/p\u003e\n\u003cp\u003eBall lock disconnect and counter-pressure filler are not included. See below for recommended products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Beer Valve Connector Tube\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBall valve with swivel connector to the counter pressure filler and long handle. 2 metre tube with FFL connector. \u003c\/p\u003e\n\u003cp\u003eUse this accessory for efficient mass filling of beer bottles or cans from kegs. Connects directly to a threaded ball lock or pin lock disconnect. The swivel connector to the counter pressure filler makes positioning the valve handle at the desired side easy.  \u003c\/p\u003e\n\u003cp\u003eBall lock disconnect and counter pressure filler not included.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902014922850,"sku":"TCCP-VK","price":298.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/ca4f013bb0807485d0ece64d72c39aaa-image.jpg?v=1746178625"},{"product_id":"tapcooler-avlopsslange-til-trykkavlastningsventil","title":"Tapcooler Drain Hose for Pressure Relief Valve","description":"\u003cp\u003eAccessories for the Tapcooler Counter Pressure Filler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Drain Tube\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrain tube for the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902017118306,"sku":"TCCP-PRD","price":59.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/eec6365aad08587939f67fa615947ac2-image.jpg?v=1746178693"},{"product_id":"tapcooler-pakning-til-boksfyllingsstasjon","title":"Tapcooler gasket for can filler station","description":"\u003cp\u003eMoulded silicone gasket with a splash rim that directs any spills down along the can when the can seal is released from the can. Fits all versions of the Tapcooler canning station.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Replacement Can Seal\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoulded silicone seal with flange to direct potential spills along the can. The silicone seal fits all versions of the canning station.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902017380450,"sku":"TCCP-RCS","price":49.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/ceb518fd0374b0688c46c39ba25c00c9-image.jpg?v=1746178707"},{"product_id":"tapcooler-manuell-trykkreduksjon","title":"Tapcooler manual pressure reduction","description":"\u003cp\u003eCannot be used with the pressure relief valve drain hose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Manual Release Plunger\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThis is a replacement for the original plunger in the pressure relief valve, with possibilities to relief all pressure before disconnecting the filler from the botle or can without adjusting the pressure relief valve. Just pull the ring to release all pressure.  \u003c\/p\u003e\n\u003cp\u003eNot possible to use with the PR valve drain tube.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902017871970,"sku":"TCCP-MRP","price":79.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/9f73ef37d48d715402d744b4baf54d98-image.jpg?v=1746178731"},{"product_id":"tapcooler-handsfree-clip","title":"Tapcooler Hands-free Clip","description":"\u003cp\u003ePractical hands-free clip that locks the Tapcooler counter-pressure filler to the bottle neck.\u003c\/p\u003e\n\u003cp\u003eCap the previous bottle while filling the next.\u003cspan class=\"JLqJ4b ChMk0b\" data-language-for-alternatives=\"no\" data-language-to-translate-into=\"en\" data-phrase-index=\"1\"\u003eThe perfect companion to the Tapcooler Counter Pressure Filler and Tapcooler Beer Valve with keg connector and hose when filling a case of beer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOnly for use with \u003ca href=\"\/en\/products\/tapcooler-olventil-med-fatkobling-og-slange\"\u003eTapcooler Beer Valve with keg connector and hose\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapcooler Handsfree Clip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHandsfree clip that locks the counter pressure filler to the bottle neck. Adjustable height for different heights of the bottle neck rim. Fits most bottle types for 26 mm crown caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly for use with connection tube!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCap the previous bottle while filling the next. The perfect companion to the \u003ca href=\"https:\/\/tapcooler.com\/en\/accessories-c-2\/counter-pressure-bottle-filler-for-vent-matic-perlick-intertap-p-16\"\u003eTapcooler counter pressure filler\u003c\/a\u003e and the \u003ca href=\"https:\/\/tapcooler.com\/en\/counter-pressure-filler-c-4\/beer-valve-keg-connector-tube-p-24\"\u003eBeer valve keg connector\u003c\/a\u003e when filling a case of beer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/piy7Jo2iG88\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902025637986,"sku":"TCCP-HF","price":98.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/656a337643116c07aba3ff4026de28df-image.jpg?v=1746179018"},{"product_id":"tapcooler-nanocanner-im-boksfyller","title":"Tapcooler Nanocanner IM - Can filler","description":"\u003ch2\u003eTapcooler Nanocanner Can Filler\u003c\/h2\u003e\n\u003cp\u003eTapcooler Nanocanner ™ IM is the new attachment for purging and closed-system filling of beverage cans with the Tapcooler counter pressure filler. It fits all types of beverage cans with 202-standard lids, both regular and \"sleek\" cans, in all heights. The upper rim of the can is sealed to the silicone gasket of the Nanocanner, and with a 1.5 bar pressure rating, you can fill the can with the counter pressure you desire. Extend the telescopic tube of the counter pressure filler to purge the can and fill from the bottom. We recommend purging through the pressure relief valve, with the can connected to the Nanocanner.\u003c\/p\u003e\n\u003cp\u003ePS! Mounting bracket is not included. Choose between a wall bracket for a fixed setup or a \u003ca href=\"\/en\/products\/tapcooler-nanocanner-magnetic-bracket-veggbrakett-ny-versjon\"\u003emagnetic bracket\u003c\/a\u003e for quick setup on a refrigerator door. The brackets can be easily connected to create a dual, triple, or quadruple can filler.\u003c\/p\u003e\n\u003cp\u003eThe Nanocanner has a lifting ring attached to the can holder housing. When the lifting ring lever is pushed to the left, the can is pressed up against the silicone seal, securing it tightly for closed purging and filling.\u003c\/p\u003e\n\u003cp\u003eOnly push the lifting ring until you meet resistance. Pushing too hard may damage the rim of the can.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou will also need (not included):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"\/en\/produkt\/fat-co2\/fat-og-co2\/tapcooler-mottrykksfyller-for-intertap-vent-matic-perlick\"\u003eTapcooler Counter Pressure Filler\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/tapcooler-olventil-med-fatkobling-og-slange\"\u003eTapcooler Beer Valve with Keg Connection and Hose\u003c\/a\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         or \u003ca href=\"\/en\/products\/skjoteslange-for-tapcooler-mottrykksfyller\"\u003eTapcooler Extension Tube\u003c\/a\u003e if you are filling directly from a tap:\u003c\/p\u003e\n\u003cp\u003eWe also recommend:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/tapcooler-avlopsslange-til-trykkavlastningsventil\"\u003eTapcooler Drain Hose\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTapcooler Nanocanner Can Filler\u003c\/h2\u003e\n\u003cp\u003eTapcooler Nanocanner™ IM is the new can filling attachment for the Tapcooler Counter Pressure Filler. It fits any 202 end cans, regular and sleek, and of any height. The upper rim of the can is clamped to the silicone seal of the can holder, and with it’s 1.5 bar pressure rating you can fill the can with the back pressure you desire. Extend the telescopic tube of the counter pressure filler to purge and fill from the bottom of the can, and we recommend purging through the pressure relief valve, with the can connected to the can holder.\u003c\/p\u003e\n\u003cp\u003ePS! Wall bracket is not included. Choose between a wall bracket for fixed setup or a \u003ca href=\"\/en\/products\/tapcooler-nanocanner-magnetic-bracket-veggbrakett-ny-versjon\"\u003emagnetic bracket\u003c\/a\u003e for super quick setup on a fridge door. The brackets interlinks easily to make a dual, triple or quadruple head can filler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional items required (not included):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/produkt\/fat-co2\/fat-og-co2\/tapcooler-mottrykksfyller-for-intertap-vent-matic-perlick\"\u003eTapcooler Counter Pressure Filler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1rem; font-family: helvetica;\"\u003e\u003ca href=\"\/en\/products\/tapcooler-olventil-med-fatkobling-og-slange\"\u003eTapcooler Beer Valve Connector Tube\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e     or T\u003ca href=\"\/en\/products\/skjoteslange-for-tapcooler-mottrykksfyller\"\u003eapcooler Extension Tube\u003c\/a\u003e if filling from taps.\u003c\/p\u003e\n\u003cp\u003eWe also recommend:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/tapcooler-avlopsslange-til-trykkavlastningsventil\"\u003eTapcooler Drain Tube\u003c\/a\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEasy installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sCz0jX8bpVI\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/tapcooler-nanocanner-im-manual4.pdf\" target=\"_blank\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902032912482,"sku":"TCNC-CH","price":698.0,"currency_code":"NOK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/4225c367b8943d36f16e234f0849ba43-image.jpg?v=1746179314"},{"product_id":"tapcooler-nanocanner-magnetic-bracket-veggbrakett-ny-versjon","title":"Tapcooler Nanocanner Magnetic Bracket - Wall Mount New Version","description":"\u003cp\u003eAccessories for Tapcooler Nanocanner.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902032945250,"sku":"TCNC-BM","price":298.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/50263fec9c5264a81c4e5604a07d7afa-image.jpg?v=1746179318"},{"product_id":"tapcooler-nanocanner-wall-bracket","title":"Tapcooler Nanocanner Wall Bracket","description":"\u003cp\u003eAccessories for Tapcooler Nanocanner.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902033436770,"sku":"TCNC-BW","price":229.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/401459abf7510172e814e9cf18d35f43-image.jpg?v=1746179339"},{"product_id":"o-ring-kit-for-tapcooler-mottrykksfyller","title":"O-ring kit for Tapcooler Counter Pressure Filler","description":"\u003ch2\u003eTapcooler O-ring kit for counter-pressure filler\u003c\/h2\u003e\n\u003cp\u003eSpare O-rings\/gaskets for Tapcooler counter-pressure filler\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902046543970,"sku":"TCCP-SK","price":35.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/b8370d380cdaf185349b92b5515317ad-image.jpg?v=1746180318"},{"product_id":"fjaer-til-co2-ventil-pa-tapcooler-mottrykksfyller","title":"Spring for CO2 valve on Tapcooler Counter Pressure Filler","description":"\u003cp\u003eReplacement spring for Tapcooler counter pressure filler.\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902046576738,"sku":"TCCPFJAER","price":5.0,"currency_code":"NOK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/e6638a1e4302dbce4b0e82832b15bed9-image.jpg?v=1746180319"},{"product_id":"tapcooler-magnetic-handsfree","title":"Tapcooler Magnetic Handsfree","description":"\u003ch2 class=\"style-scope ytd-watch-metadata\"\u003eTapcooler Magnetic Handsfree \u003c\/h2\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/f9CoZIVfZmY\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Tapcooler","offers":[{"title":"Default Title","offer_id":41902050181218,"sku":"TCCP-MHF","price":349.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/files\/768e4a5b4bad2d17f98867ff15a13cfb-image.jpg?v=1746180498"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/8422\/6914\/collections\/36db33aaa8a78bd1fae7c112d08865f1-image.jpg?v=1747322591","url":"https:\/\/brewshop.se\/en\/collections\/tapcooler.oembed","provider":"Brewshop","version":"1.0","type":"link"}